Simple Steps to Get Water Out Of A Disposable Vape

Have you ever accidentally dropped your disposable vaporizer into water or spilled a drink on it? That can make your device useless and annoying. Luckily, there is a remedy to this headache: learn how to extract water from a disposable vaporiser.

What happens when you get a disposable vape wet?

With electronic cigarettes and disposable vapes such as the Elf bar 10000 puffs and VNSN Quake 10000 becoming more popular for use in place of traditional tobacco consumption, it is either quite useful while on the move or a supposed healthier means. Unfortunately, water damages them as quickly as the other electrical devices.

Tools for Water Extraction in Disposable Vapes 

• You will need a few common supplies to fix a wet disposable vape, such as:
• A clean cloth or paper towels,
• Tiny dishes or small containers,
• Uncooked rice, and
• Hair dryer (optional).

This is a how-to guide for removing water from a disposable vape.

Before doing so, one should remember that removing the vaporizer after contact with a liquid is never effective and may even cause permanent damage. If so much water has seeped inside that we recommend simply pitching it and buying another one.

Step One: Remove Cartridge and Battery

Remove the cartridge and battery of the vape device. Use fingers or a small screwdriver to pry off the battery cover or access door. At this point, the batteries should be exposed. Careful extraction of all batteries prevents damage to any connections or components within the device.

Step Two: Clean the Outside of the Vaporizing Device Dry.

Use a clean towel or wipes to thoroughly dry and clean the vape. Also, try to reach for any gaps where water can enter.

Now that I’ve given you the steps, let’s proceed. 

Step 3: Remove the Water Found Visibly Inside the Vape

Abstain from cleaning or scrubbing the exposed inner circuitry, as it might get damaged. Completely remove any visible water from inside the device using paper towels or any soft items.

Step 4: Let It Dry Out on Its Own:

Once the gizmo is as dry as possible, please place it in a dry area for approximately 24 hours, allowing the trapped water to air dry. Please do not turn the device on unless you are certain it is completely dry.

Step 5: Reassemble the Vape and Test It 

The last step after the disposable vape has dried is putting it back together.

Before reinstalling the cartridge, ensure that it is properly mounted without damaging the device by screwing it into the battery section first. The disposable vape can be turned on five times quickly by pressing the power button five times. 

Ensure that your vaporizer is functional before use after reassembly. If it still doesn’t work, it may be time to look for a new e-cigarette.

Conclusion

Accidental damage can happen with any vaping experience; therefore, water damage is a useful skill to get familiar with in this hobby. Taking water out of a disposable vapour is yet another way to demonstrate one’s aptitude for solving problems. 

So let’s grab those rice grains, cotton swabs, and vacuum cleaner and get cracking! Who knows? You might have found a hobby in repairing your vape. 

Still unsure how to maintain your vape? Worry not, we’ve got you. Get your VNSN Quake 10000 and Elf Bar 10000 puffs from our online vape shop, where we guarantee to provide the best disposable vapes and services.

Hurry up and get your hands on trendy vapes to enjoy your summer time.